Logo

ASTM A1010/A1010M-13

Historical Revision

Standard Specification for Higher-Strength Martensitic Stainless Steel Plate, Sheet, and Strip

$73.00

$73.00

$131.40

$0.00

$0.00

$0.00



Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


Stay effortlessly up-to-date with the latest standard revisions. When new versions are released, they're automatically charged and delivered to you, ensuring seamless compliance.

...

1.1 This specification covers martensitic stainless steels for various structural, architectural, pressure vessel, and heat-resisting applications. The mechanical properties of these steels are customarily, but not necessarily, developed by a suitable heat treatment generally referred to as tempering.

1.2 Steel products under this specification are available in two grades:

Grade

Yield Strength, min, ksi [MPa]

40 [275]

40 [275]

50 [345]

50 [345]


1.3 The maximum thickness of plates is limited only by the capacity of the composition to meet the specified mechanical property requirements; however, current practice normally limits the maximum thickness of plates furnished under this specification to 2 in. [50 mm].

1.4 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.


This specification covers the standard for martensitic stainless steel for various structural, architectural, pressure vessel, and heat-resisting applications. The material shall undergo heat-treatment by tempering. The steel shall conform to the requirements as to chemical composition specified for carbon, manganese, phosphorus, sulfur, silicon, chromium, nickel, molybdenum, and nitrogen. Mechanical testing shall be performed on the steel and shall conform to the specified values in mechanical properties such as yield strength, tensile strength, elongation, and Brinell hardness.


SDO ASTM: ASTM International
Document Number A1010
Publication Date Oct. 1, 2013
Language en - English
Page Count 2
Revision Level 13
Supercedes
Committee A01.17
Publish Date Document Id Type View
March 1, 2024 A1010_A1010M-24 Revision
Oct. 1, 2013 A1010_A1010M-13 Revision
March 10, 2001 A1010_A1010M-01E01 Revision
Nov. 1, 2018 A1010_A1010M-13R18 Reaffirmation
May 1, 2009 A1010_A1010M-01R09 Reaffirmation